What Is the Process for Asphalt Sealcoating in Wilmington?

Do you want to know the process for asphalt sealcoating in Wilmington? Well, it’s all about preparing, cleaning, and applying.

First, you’ll need to prepare the surface by removing any debris or loose materials. Then, you’ll clean and repair any cracks to ensure a smooth finish.

Once that’s done, it’s time to apply the sealcoat, which will protect your asphalt from the elements and prolong its lifespan. After applying the sealcoat, you’ll need to allow for drying and curing, which may take a day or two.

Finally, you’ll add those finishing touches and do some clean-up. Now you’ll have a beautifully sealed asphalt surface, ready to withstand the test of time.

Preparing the Surface

To prepare the surface for asphalt sealcoating in Wilmington, you’ll need to clean and inspect the asphalt carefully.

Begin by removing any debris, such as dirt, leaves, and loose gravel.

Then, thoroughly sweep the area to ensure it’s free from any remaining dirt or dust.

Next, inspect the asphalt for cracks, potholes, or other damage, and repair them as necessary.

Cleaning and Repairing Cracks

After you have thoroughly cleaned and inspected the asphalt surface, it’s important to address any cracks.

Begin by filling in small cracks with a rubberized crack filler. For larger cracks, use a hot pour sealant.

Make sure to follow the instructions provided by the manufacturer for the best results.

Applying the Sealcoat

Now, it’s time for you to apply the sealcoat to your asphalt surface. This step is crucial in protecting your pavement from the elements and extending its lifespan.

Begin by stirring the sealcoat thoroughly to ensure a smooth consistency. Use a squeegee or brush to apply an even layer of sealcoat, working from one end of the surface to the other.

Take your time and make sure to cover all areas evenly. Allow the sealcoat to dry completely before allowing any traffic on the surface.

Allowing for Drying and Curing

Once the sealcoat has been applied, it’s crucial to give it enough time to dry and cure properly. This step is essential to ensure the longevity and effectiveness of the sealcoat.

During the drying and curing process, it’s important to avoid any foot or vehicle traffic on the newly sealed surface. By allowing the sealcoat to fully dry and cure, you’re providing the best conditions for it to bond with the asphalt and provide optimal protection.

Finishing Touches and Clean-up

To complete the asphalt sealcoating process in Wilmington, you’ll need to attend to the finishing touches and clean-up.

This involves removing any excess sealer or debris from the surrounding areas, such as sidewalks and driveways.

You should also inspect the newly sealed surface for any missed spots or unevenness and touch them up accordingly.

Lastly, be sure to clean and properly store all equipment used during the sealcoating process to maintain its longevity.

Get in touch with us today

Discover how our seasoned team is ready to address all your seal coating requirements in Wilmington. No project is too large or too small for our expertise! Reach out to us by phone or complete our form today to get started.